Slave Id - 3onedata GW11 Series User Manual

Main element configuration instructions in Modbus Parameters interface
Interface Elements
Initial Delay
Modbus TCP
Exception
Port
Response Timeout
Inter-character
Timeout
Inter-frame Delay

5.2 Slave ID

Function Description
On the "Slave ID" page, you can configure master and slave ID mapping information.
Such as the operating mode of the Modbus gateway, the slave start ID, the slave end
ID, and the slave offset ID.
Operation Path
Open "Main Menu > Modbus Settings > Slave ID" in sequence
Interface Description
Slave ID interface screenshot
Description
Manually configure the Modbus initial delay time.
Enable or disable the Modbus TCP exception function.
Select the serial number of the device.
Manually configure the time between the request and the
response.
Manually configure the character interval.
Manually configure the interframe delay time.
3onedata proprietary and confidential
Copyright © Shenzhen 3onedata Technology Co., Ltd.
(I)GW11XX Modbus User Manual
15