(I)GW11XX Modbus User Manual
3. In the "Channel NO." is 2, click the "Modify".
4. Enter "2" in the "Slave ID Start" and "Slave ID End" text boxes.
5. Enter "0" in the "Slave ID Offset" text box.
6. Click "OK".
Step 5
Run "mbpoll" and "mbslave" software to simulate master and slave configuration.
1. Run the "mbslave.exe" software, click "Setup> Slave Definition".
2. Enter "2" in the "Slave ID" text box.
3. Other parameters remain the default, click "OK".
4. Click " Connection > Connection Setup ".
5. Click the "Connection" drop-down list box and select "serial port".
6. In the "Serial Settings" option box, configure serial port information such as serial
number, baud rate, data bit, parity bit and stop bit.
3onedata proprietary and confidential
38
Copyright © Shenzhen 3onedata Technology Co., Ltd.