Table of Contents
Advertisement
(I)GW11XX Modbus User Manual
11. Other parameters remain the default, click "OK".
12. Click " Connection > Connection Setup ".
13. Click the "Connection" drop-down list box and select "serial port".
14. In the "Serial Settings" option box, configure serial port information such as serial
number, baud rate, data bit, parity bit and stop bit.
15. Select the "RTU" mode in the "Mode" option.
16. Other parameters remain the default, click "OK".
Step 6
Check the normal communication between the RTU master and the TCP slave.
3onedata proprietary and confidential
34
Copyright © Shenzhen 3onedata Technology Co., Ltd.
Advertisement
Table of Contents
