Selecting A Language - Elcometer 456 Operating Instructions Manual

2.8 Selecting a language

The Elcometer 456
When the gauge is switched on for the first time after
dispatch from the Elcometer factory the display will show
the language selection screen (Figure 6).
Figure 6. Language selection screen
2.8.1 At first switch on
1. Press Up/Down
required.
2. Press
language.
The screen displays an Elcometer 456
screen (Figure 4) followed by the reading screen
(Figure 5).
The gauge operates in the new language until
changed.
2.8.2 At any time
1. Switch gauge off.
2. Press and hold left hand softkey.
3. Press
The display will show language selection screen
with current language highlighted by cursor.
4. Release left hand softkey.
Follow the instructions given in 2.8.1.
Alternatively, select MENU/SETUP/LANGUAGES - see
"Main MENU - Extended menu on" on page 18.
2
SEL softkey
key to switch on gauge.
has over 20 built-in languages.
softkeys
to activate
to locate
the
language
selected
2
welcome
11