Operations; Gas Monitoring With Gas Module 3 - Mindray Gas Module 3 Operating Instructions Manual

2.0
2.1
Gas Module 3 Operating Instructions
To Purchase, Visit Avobus.com

Operations

The menus shown in the following sections are from Mindray DS Passport 2
™
and Spectrum OR bedside monitors.

Gas Monitoring with Gas Module 3

The Gas Module option in Mindray DS bedside monitors allows for the measurement of
anesthetic gases, O , N O and CO
2 2
cannula (non-intubated) for oxygen and CO
breathing circuit (intubated).
FIGURE 2-1 Gas Menu
NOTE: The bedside monitor will interface to the Gas Module 3 via
the Serial Port Connector on the Comm-Port that is mounted
in the rear of the bedside monitor.
0070-10-0696-02
or call 1-800-674-3655
levels. Measurement can be acquired via a nasal
2
only or through a sampling line connected to a
2
® ®
, Spectrum ,
2 - 1