Installation; Electrical Connection; Safe Disconnection - SEW-Eurodrive MOVIMOT D EtherNet/IP Compact Manual

2.6

Installation

The units must be installed and cooled according to the regulations and specifications
in the corresponding documentation.
Protect the field distributors, fieldbus interfaces and MOVIMOT
cessive strain.
The following applications are prohibited unless explicitly permitted:
•
•
•
2.7

Electrical connection

Observe the applicable national accident prevention guidelines when working on live
field distributors, fieldbus interfaces and MOVIMOT
Perform electrical installation according to the pertinent regulations (e.g. cable cross
sections, fusing, protective conductor connection). For any additional information, refer
to the applicable documentation.
For notes on EMC-compliant installation, such as shielding, grounding, arrangement
of filters and routing of lines, refer to the documentation of the MOVIMOT
The manufacturer of the machine or system is responsible for maintaining the limits
established by the EMC legislation.
Protective measures and protection devices must comply with the regulations in force,
such as EN 60204 or EN 61800-5-1.
2.8

Safe disconnection

The field distributors and fieldbus interfaces meet all requirements for protective sep-
aration of power and electronics connections in accordance with EN 61800-5-1. All
connected circuits must also satisfy the requirements for protective separation to en-
sure protective separation.
Use in potentially explosive atmospheres.
Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.
Use in non-stationary applications with strong mechanical oscillation and impact
loads.
®
inverters (e.g. BGV A3).
Compact Manual – EtherNet/IP™ Interfaces, Field Distributors
Safety notes 2
Installation
®
inverters from ex-
®
inverter.
9