Supplementary Safety Notes For Field Distributors - SEW-Eurodrive MOVIMOT D EtherNet/IP Compact Manual

2.10

Supplementary safety notes for field distributors

2.10.1 MFZ.3. field distributor
•
•
2.10.2 MFZ.6. field distributor
•
•
•
2.10.3 MFZ.7. field distributor
•
•
2.10.4 MFZ.8. field distributor
•
•
•
Disconnect the unit from the power supply system before removing the fieldbus in-
terface or the motor connector. Dangerous voltages may still be present for up to 1
minute after disconnection from the power supply.
The fieldbus interface and the connector of the hybrid cable must be connected to
the field distributor and fastened during operation.
Before removing the connection box cover for the line connection, disconnect the
unit from the power supply system. Dangerous voltages may still be present for up
to 1 minute after disconnection from the power supply.
NOTICE! The switch only disconnects the MOVIMOT
supply system. The terminals of the field distributor are still connected to the power
supply after activating the maintenance switch.
During operation, the connection box cover for the line connection and the con-
nector of the hybrid cable must be connected to the field distributor and fastened.
Before removing the MOVIMOT
ply system. Dangerous voltages may still be present for up to 1 minute after dis-
connection from the power supply.
®
The MOVIMOT inverter and the connector of the hybrid cable must be connected
to the field distributor and fastened during operation.
Disconnect the unit from the power supply system before removing the connection
box cover for the power supply connection or the MOVIMOT
voltages may still be present for up to 1 minute after disconnection from the power
supply.
NOTICE! The maintenance switch only disconnects the connected motor from the
power supply system. The terminals of the field distributor are still connected to the
power supply after activating the maintenance switch.
During operation, the terminal box cover for the power supply connection, the
®
MOVIMOT inverter, and the connector of the hybrid cable must be connected to
the field distributor and secured.
Supplementary safety notes for field distributors
®
inverter, disconnect the unit from the power sup-
Compact Manual – EtherNet/IP™ Interfaces, Field Distributors
Safety notes
®
inverter from the power
®
inverter. Dangerous
2
11