Download
Share
Print this page
zortrax M300 Manual
  1. Manuals
  2. Brands
  3. zortrax Manuals
  4. 3D Printers
  5. M300
  6. Manual

zortrax M300 Manual

Hide thumbs Also See for M300:

Advertisement

Quick Links

Download this manual
Packing
SOURCE:
https://support.zortrax.com/m300-plus-packing/

Advertisement

loading
Need help?

Need help?

Do you have a question about the M300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for zortrax M300

Summary of Contents for zortrax M300

  • Page 1 Packing SOURCE: https://support.zortrax.com/m300-plus-packing/...
  • Page 2 Table Of Content Unloading the Material Packing...
  • Page 3 Unloading the Material Unload the material using the options from the menu; select Tools, Material and Unload material. Then, remove the end of the material from the material endstop. Remember to secure the end of the material using the specially designed holes in the spool.
  • Page 4 Packing Turn the printer off and unplug the power cable. Remove the spool from the spool holder. Then, remove the spool holder.
  • Page 5 Remove the material guide from the extruder and the material endstop.
  • Page 6 Remove the side covers. Unplug the extruder cable.
  • Page 7 Unplug the heatbed cable from the platform and from the Z-axis cover. Remove the cable from the printer and put it in the Starter Kit box.
  • Page 8 Remove the platform from the printer. Lift the heatbed mount.
  • Page 9 Put the platform into the accessories box and place the box on the bottom of the printer. Put the printer's accessories in the foam and put the foam on the Starter Kit box inside the printer.
  • Page 10 Move the extruder manually to the back right corner of the printer. Then, secure the extruder with the shipping clips. Next, secure the foam and the Starter Kit box with the belt.
  • Page 11 Place the fillers on the foam. Then, lower the heatbed mount so that the box and the foam are tightly secured. Wrap the printer in foil.
  • Page 12 Place the cushioning at the bottom of the box. Place the printer on the bottom cushioning inside the box.
  • Page 13 Place the top cushioning on the printer so that the cushioning fits the extruder.
  • Page 14 Pack the printer using the provided box. Tape the box.