Accessories - REMEHA Calenta 25s Installation And Service Manual

Calenta 25s - 28c - 35s - 40c
040412 - 7600585-01
4 Run-off collector for siphon and safety valve
4 Installation and Service Manual
4 Sticker: This boiler has been set for...
4 User Guide
4 Warranty card
4 Maintenance log
These installation and maintenance instructions deal only with the
items included in a standard delivery. For the installation or mounting
of any accessories supplied with the boiler, a rail or mounting frame,
for example, refer to the mounting instructions delivered with the
accessories in question.
The boiler is also available with a modular adjustment
device, such as the Combi Comfort system. In this case,
the iSense adjustment device is delivered with the
appliance.
4.2.2.

Accessories

Various options are available depending on the configuration of the
installation:
Description
Mounting frame
Mounting frame connection kit, comprising stop valves, safety unit and
pressure gauge
Supporting device for feeding pipes behind the appliance
Pipe kit for connections behind the appliance (in combination with the
supporting device)
Protective cover for the connections
Propane conversion kit
Remeha Celcia 10 on/off thermostat
Remeha qSense basic modulating control system
Remeha iSense extended modulating control system
Remeha iSense integration kit
Outside temperature sensor
Passing through walls Type C1
Combustion air/flue gas adapter 80/125 mm
Combustion air/flue gas adapter 60/100 mm
Kit for connection to the water heater
DHW sensor
Kit for connection to the solar water heater
0-10V (IF-01) control PCB
Extended control PCB (SCU-S02)
Box for the control PCBs
Connection set for coupling to the heat recycling system
Cleaning accessories for the heat exchanger (central heating)
Cleaning kit for the plate heat exchanger (DHW)
Maintenance box
Recom communication kit
Installation kit for the water / gas connection if replacing Remeha Quinta
boilers
4. Installation
21