Accessories - REMEHA 610 ECO Technical Information

fig. 04 Installation options
00.61H.79.00003
I = Front (service sides)
A = Short side (alternative orientation of the instrument
panel)
The service side with the inspection cover on the heat
exchanger is considered to be the front of each boiler
module.
The boiler instrument panel can be rotated to face the
front or the short side of the boiler module (front will be
standard unless stated on the purchase order) (see fig.
04).
g
Important!!
When ordering a Remeha Gas 610 ECO, it is essential
that the number of sections and the orientation of the
instrument panel are required.

4.5 Accessories

- Modulating weather compensators
- Second return connection*
- System pressure sensor*
- Vertical room sealed terminal VRS (2 x ø 350)
- Common air supply adapter for room sealed opera-
tion (ø 350)
- Condensate neutralisation box
- Condensate neutralisation granules
- Recom communication set with CD-ROM, interface
and wiring
Remeha Gas 610 ECO
- Interfaces for communication with various controllers
(see section 8.6)
- Gas leak proving control*
- Minimum gas pressure switch*
- Cleaning tools
- Air supply filter*
Note: * These accessories must be ordered in pairs (one
for each module)
12