Pancam-C/Pancode Setup - ITS Telecom PanCam-C Installation And Programming Manual

Programming
3.5

PanCam-C/Pancode Setup

The PanCam-C/Pancode can work in two modes of operation:
Standard and Speed-dial.
In Standard mode, which is the default, the keypad requires
direct dialing of extensions and numbers.
In Speed-Dial mode, keys 1-9 can be assigned destination
phone numbers. When a key is pressed, the assigned
destination number is dialed.
To Set the PanCam-C/Pancode Operation Mode
1. Dial the PanCam-C/Pancode line/extension from any
touch-tone telephone.
2. Wait until the PanCam-C/Pancode answers and
beeps.
3. Dial *900.
4. Enter the Programming Access Password (default
password is 1234.)
5. For Standard Mode, dial *151 (See 3.5.2 for
programming)
-or-
for Speed-Dial Mode, dial *152 (See 3.5.3 for
programming).
Note: When selecting or changing the operation mode with
*151 or *152, all previously programmed information
will automatically be deleted. The unit will provide
you with it's default values.
Standard Setup
The following table contains programming functions, which
can be accessed in the programming mode for Standard Setup
operation.
18 PanCam/Pantel/Pancode Installation and Programming Manual