ITS Telecom PanCam-C Installation And Programming Manual page 21

OPERATION COMMAND
*For Pantel *371 + X + YYYY
Indoor ONLY: where:
Busy off/on time X = 1; off time setup
cadence setups for X = 2; on time setup
disconnecting the YYYY = Cadence in
line when the steps of 20 milliseconds
destination is busy
Digit(s) to open *441 +XXXX + #
the door from any where:
extension XXXX = Digits (0-9)
Note: Up to 4 digits
*For Outdoor *460 + X
units ONLY where:
Time between X = 1-9
DTMF's (Each step is 200 msec)
Maximum time *462 + XX
for the line to be XX = Seconds (10-99)
opened (sec) 00 = Unlimited
Door opening *464 + X
time limit (sec) X = Seconds (1-9)
Change the *600 + New password
system (must be 4 digits).
administrator's Warning: Do not use
password the * or # keys
*For PanCam-T *620 + X
ONLY X = 0 camera off
Camera X = 1 camera on
instructions X = 2 camera powered
when call button is
pressed
PanCam/Pantel/Pancode Installation and Programming Manual
Programming
DEFAULT
500 msec
500 msec
8
2 (400ms)
45 sec
3 sec
1234
0
17