Using The Accessory Tips And Grounds - Keysight N2795/6A User Manual

1 Using the Probes

Using the Accessory Tips and Grounds

Table 4 Probe Configurations in Order of Decreasing Bandwidth
Recommended
Order of Use Probe Configuration Topic
12
This section presents the various probe accessory configurations
listed in order of available bandwidth for your measurements.
Select the configuration to match your measurement needs,
including ease of use.
"Rigid or Spring Tips with Offset Ground or Ground Blade"
page 13
"Copper Pads with Flex Ground"
"Y-Leads Adapter with 0.1" Headers"
"Flexible Nose Clips"
"Ground Leads and Right-Angle Ground Leads"
page 18
on page 15
on page 16
on page 17
Typical
Bandwidth
on 1 GHz (N2795A)
2 GHz (N2796A)
900 MHz (N2795A)
1.8 GHz (N2796A)
750 MHz (N2795A)
1 GHz (N2796A)
500 MHz (N2795A)
500 MHz (N2796A)
on Unspecified
N2795/6A User's Guide