Using The Probes - Keysight N2795/6A User Manual

Single-ended probes

Table of Contents

Keysight N2795/6A Single-Ended Probes

User's Guide

1 Using the Probes

The N2795/6A are 1 and 2 GHz

single-ended active probes with the

AutoProbe interface (compatible with

Keysight's InfiniVision and Infiniium

family of oscilloscopes). These probes

integrate many of the characteristics

needed for today's general-purpose,

high-speed probing, component

design/characterization, and

educational research applications. Its 1MW input resistance and

extremely low input capacitance (1 pF) provide ultra low loading of

the DUT. This, accompanied with superior signal fidelity, makes

these probes useful for most of today's digital logic voltages. And

with their wide dynamic range (±8V) and offset range (±12V for

N2796A, ±8V for N2795A), these probes can be used in a wide

variety of applications.

For high signal integrity probing, the N2795A 1 GHz and N2796A 2

GHz active probes are perfect complements to Keysight's 500 MHz

- 600 MHz and 1 GHz bandwidth oscilloscopes, respectively. The

Table of Contents