Replacing Rigid, Solid Probe Tip, And Spring-Loaded Probe Tips - Keysight N2894A User Manual

Accessory
Trimmer tool
Color coding rings
User's Guide

Replacing Rigid, Solid Probe Tip, and Spring-Loaded Probe Tips

damage.
To change the probe tip, use pliers to grip the tip
and pull it straight out of its contact socket along
the axis of the probe. Do not grip the plastic insula-
tor or the housing with the pliers because the tip
could be crushed (see
being unable to remove the tip and/or damaging
the probe. Once the probe tip is removed, the new
tip can be inserted with pliers into the contact socket along the axis of the probe. In
order to insert the probe tip completely into the housing, carefully press the probe
tip against a hard surface.
Keysight N2870A-Series and N2894A Passive Probes User's Guide
Quantity N2871A,
N2872A,
N2873A,
N2875A,
N2894A
1

3x4 colors 
1 
The solid tips and spring-loaded tips are replaceable. Spring
loaded probe tips offer a method of probing signals that is
less susceptible to vibration or movement than traditional
rigid tips. Many users find it easier to use this type of tip. The
spring loaded tips work when they are either partially or fully
compressed and are protected against over compression
Figure 2). This could result in
N2870A N2874A,
N2876A
 
 
Accessories
11