Table of Contents
Advertisement
9. TRANSACTION ENTRIES
9.1
Receipt-Issue/Non-issue Selection
This operation determines whether or not the receipt is issued.
Mode Lock may be in any position: Pressing the [SERVER #/RECEIPT] key without a prior numeric entry or
NOTES:
1. The "R OFF" status at the starting of a
transaction entry decides whether a
receipt will be issued for the transaction
or not. Switching the Receipt ON/OFF
status during a transaction will not be
effective.
2. If a transaction entered with the "R OFF"
status and finalized but a receipt is
required, the [RECEIPT ISSUE] (Post-
issue Receipt) key can be operated to
issue a receipt.
9.2
Store Message Display
This operation designates and displays one of the 4 messages programmed to be displayed in the REG or MGR
mode when the register is outside a sale. The message is displayed on the operator display and the dot display
area in the customer display.
OPERATION
(must be operated outside a sale)
|Display Message Code| [NS]
1 to 4
(corresponding to Line No.
1 to 4 in programming)
NOTE:
This operation is effective when the program options "Display Message Method 16 CHARACTERS
HELD" and "Display Message DISPLAY in REG and MGR mode (as well as in LOCK mode)" are both
selected.
9.3
No-sale
The no-sale transaction is used to open the cash drawer without affecting any sales, such as for giving change,
testing the receipt/journal print condition, etc.
OPERATION
(must be operated outside a sale)
[NS] ...................... The drawer opens and a No-sale receipt is issued.
pressing the [RECEIPT] key (whichever key is installed on the keyboard) will
change the receipt ON/OFF status. Each time the key is pressed the receipt
ON/OFF status is changed.
9-2
9.1 Receipt-Issue/Non-issue Selection
* REG
* 02-06-1999 03:04
OFF
Receipt OFF
Indicator
RECEIPT
OFF
TOTAL
DISP1
DISP2
DISP3
DISP4
EO1-11138
P1S1
0.00
0.00
DISP5
Advertisement
Chapters
Table of Contents
