Preset Rate Setting For Selective Itemizers (Si1 And Si2) - TEC FS-2600-1 SERIES Owner's Manual

5. PROGRAMMING OPERATIONS
ex.) To set 10% on [%+] Key:
Mode Lock: SET
Enter 10, depress [%+].
To reset the rate once set:
Enter 0, depress the required % key.
(Then the % key will always require a manual rate entry in sale entries.)

Preset Rate Setting for Selective Itemizers (SI1 and SI2)

If any of [ST1/TL] (or [SI/TL]) and [SI2/TL] keys are installed on the keyboard, a preset rate may be
programmed on each key.
As for the functions and applications of the Selective Itemizers, refer to the description on the next page.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
|Preset Rate of SI 1|
(0.001 to 99.999 (%);
use the [ . ] key if a decimal portion is contained.)
|Preset Rate of SI 2|
ex.) To set 7% as SI 1 preset % rate:
Mode Lock: SET
7 [ST1/TL]
P00 %1RATE
%+
When you complete the following
programming, the screen shown below will
appear. Depress the [ESC] key to go
back to the program menu screen.
* SET * 02-06-1999 12:34
PROGRAMMING
09 SI1%RATE
10 SI2%RATE
11 CUR RATE1
12 CUR RATE2
13 CUR RATE3
14 CUR RATE4
15 CUR RATE5
16 REG NO.
Please input data.
Pg up
[SI1/TL] (or [SI/TL])
[SI2/TL]
5-59
5.4 How to Access a Program Item
Journal Print
0139 10:49TM
MISC
#0
0.00
Pg dw Enter
EO1-11138
10%
0%
0%
0 *
0 *
0 *
0 *
0 *