TEC FS-2600-1 SERIES Owner's Manual page 115

5. PROGRAMMING OPERATIONS
NOTE: You can use a maximum of 99 departments. The memories of the departments 1 to 30 have already
been opened before delivery of the register.
If you want to open a memory and use a department other than the departments 1 to 30, enter a
department code you want to designate, then depress the [DP#] key in the key sequence of the
Department Table Programming. The memory of the department will be opened automatically.
When you only want to open a memory other than the departments 1 to 30, operate as follows.
3 [X] |Department Code| [DP#]
Repeatable for another department
ex.) To program the following to a department code 1.
Department Code 1:
Mode Lock: SET
Enter 3, depress [X].
1 [DP#] 1 [ST] 0311 [#] (2 [ST]) VEGETABLE [ST]
(3 [ST]) 0 [#] (4 [ST]) 7 [#] (5 [ST]) 2 [#] (6 [ST]) 5000 [#] (7 [ST]) 100 [#] [AT/TL]
• Deletion
CONDITION After Department Daily & GT and PLU Daily and GT Reset
OPERATION Mode Lock: SET
Individual Department Deletion
3 [X] [ITEM CORR]
Repeatable for another department to be deleted.
All Department Deletion
3 [X] [ITEM CORR]
Address 1 (Major Group/Minor Group):
Address 2 (Name):
Address 3 (Status 1):
Address 4 (Status 2):
Address 5 (Tax Status):
Address 6 (High Amount Limit):
Address 7 (Low Amount Limit):
|Department Code| [DP#]
[ALL VOID]
5-16
[AT/TL]
03/11
VEGETABLE
0 (no ON-status)
7 (Sales data outputted to RKP3)
2 (Tax 2 taxable)
5000 ($50.00)
100 ($1.00)
Journal Print
P03 DEPARTMENT
01 DP01
#01
#02 DP01VEGETABLE
#03
#04
#05
#06
#07
0433
[AT/TL]
EO1-11138
5.4 How to Access a Program Item
0311
0
7
2
50.00
1.00
16:35TM
[AT/TL]