TEC FS-2600-1 SERIES Owner's Manual page 111

5. PROGRAMMING OPERATIONS
NOTES: 1. The "Address Nos" designation at the top after "3 [X]" can be skipped if not necessary. If entered,
the designated Address (es) will be automatically accessed after the department designation. For
example, if you enter |0204| [#] here (designate each address by entering a two-digit code; 01
for Address 1, 02 for Address 2, you will then enter:
Dept Code + [DP#] key,
Character Entries [ST] ("2 [ST]" can be skipped), then
Status Code for Status 2 Selection [#] ("4 [ST]" can be skipped), then you
may go on to another department setting for the same address designations.
But still in this case, you can go to other addresses by first entering the Address No. and
depressing [ST]. The Address Designation feature may be useful when you want to program or
change contents of only one or two specific Addresses of multiple departments. (For example,
when you want to change only the names, but not any other programmed contents, of 15
departments.)
2. When the Address No. is sequential from the preceding address (if the Address Designation
feature has not been used), the Address No. and the following [ST] can be omitted.
3. The programming contents of each address are further described in the DEPARTMENT TABLE
PROGRAMMING CONTENTS below.
Address No.
1 Linked Group Code
Enter a 4-digit code, composed of a 2-digit Major Group Code and 2-digit Minor Group Code.
ex.)
NOTE:
DEPARTMENT TABLE PROGRAMMING CONTENTS
Description of Programming Contents
| | | | [#]
Minor Group Code 01 to 30
Major Group Code 01 to 10
To link Major Group No. 1 and Minor Group No. 1:
Enter: (0) 1
Major Group
Code
Enter 0 (or 00) when the department is not linked to any Major
Group.
The "Major Group" and "Minor Group" here are merely names for those two grouping
total memories. In the memory process, those two totals are independent from the
other and no logical check is made for a combination of the Major and Minor group
codes to be linked to each department. In other words, you may regard them as "A"
grouping and "B" grouping. See the examples on the next page:
-- Continued on next page --
0 1
Minor Group
Code
Enter 00 when the department is not linked to
any Minor Gruop.
5-12
EO1-11138
5.4 How to Access a Program Item