Table of Contents
Advertisement
ECM-WHL User's Manual
Redirect After POST
3.6.2.11 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices
48 ECM-WHL User's Manual
Always Enable[Default]
BootLoader
Options
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
When Bootloader is selected, then Legacy
Console Redirection is disabled before booting to
legacy OS. When Always Enable is selected,
then Legacy Console Redirection is enabled for
legacy OS. Default setting for this option is set to
Always Enable.
Description
The time-out value for Control, Bulk, and
Interrupt transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as
'CDROM', drives with no media will be
emulated according to a drive type.
Advertisement
Table of Contents
