Avalue Technology ECM-WHL User Manual page 40

ECM-WHL User's Manual
3.6.2.3.1.1 Config TDP Configurations
Item
Configurable TDP Boot Mode
Configurable TDP Lock
CTDP BIOS control
Power Limit 1
Power Limit 2
40 ECM-WHL User's Manual
Option
Nominal[Default],
Down
Up
Deactivate
Disabled[Default]
Enabled
Disabled[Default]
Enabled
0
0
Description
Configurable TDP Mode as
Nominal/Up/Down/Deactivate TDP selection.
Deactivate option will set MSR to Nominal
and MMIO to Zero.
Configurable TDP Mode Lock sets the Lock
bits on TURBO_ACTIVATION_RATIO and
CONFIG_TDP_CONTROL. Custom
ConfigTDP Count will be forced to 1 and
Custom ConfigTDP Boot Index will be forced
to 0.
Enable CTDP control via runtime ACPI BIOS
methods. This "BIOS only "feature does not
require EC or driver support.
Power Limit 1 in Milli Watts. BIOS will round
to the nearest 1/8W when programming. 0=
no custom override. For 12.50W, enter
12500. Overclocking SKU: Value must be
between Max and Min Power Limits
(specified by
PACKAGE_POWER_SKU_MSR). Other
SKUs: This value must be between Min
Power.
Power Limit 2 value in Milli Watts. BIOS will
round to the nearest 1/8W when
programming. 0= no custom override. For
12.50W, enter 12500. Processor applies