Table of Contents
Advertisement
ECM-WHL User's Manual
3.6.2.1 Connectivity Configuration
Item
CNVi Mode
Discrete Bluetooth Module
36 ECM-WHL User's Manual
Options
Disable Integrated
Auto Detection[Default]
Disabled[Default]
Thunder Peak
Description
This option configures Connectivity. [Auto
Detection] means that if Discrete solution is
discovered it will be enabled by default. Otherwise
Integrated solution (CNVi) will be enabled; [Disable
Integrated] disables Integrated Solution. NOTE:
When CNVi is present, the GPIO pins that are used
for radio.
Seriallo UART0 needs to be enabled to select BT
Module.
Advertisement
Table of Contents
