Gt - Power Management Control - Avalue Technology ECM-WHL User Manual

Power Limit 1 Time Window
ConfigTDP Turbo Activation
Rtaio
3.6.2.3.2 GT – Power Management Control
Item
RC6(Render Standby)
Maximum GT frequency
Disable Turbo GT
frequency
0[Default]/1/2/3/4/5/6
/7/8/10/12/14/16/20/24
/28/32/40/48/56/64/80
/96/112/128
0
Option
Enabled[Default],
Disabled
Default Max Frequency[Default]
100Mhz/150Mhz/200Mhz/250Mhz/300Mhz
/350Mhz/400Mhz/450Mhz/500Mhz/550Mhz
/600Mhz/650Mhz/700Mhz/750Mhz/800Mhz
/850Mhz/900Mhz/950Mhz/1000Mhz/1050Mhz
/1100Mhz/1150Mhz/1200Mhz
Enabled
Disabled[Default]
control policies such that the package power
does not exceed this limit.
Power Limit 1 Time Window value in
seconds. The value may vary from 0 to 128.0
= use default value (28 sec). Defines time
window which TDP value should be
maintained.
Custom value for Turbo Activation Ratio.
Needs to be configured with valid values
from LFM to Max Turbo. 0 means don't use
custom value.
Check to enable render
standby support.
Auto Updated.
Enabled: Disables Turbo GT
frequency. Disabled: GT
frequency is not limited.
ECM-WHL User's Manual 41
User's Manual
Description