Related Manuals for Avalue Technology ECM-QM87R
Summary of Contents for Avalue Technology ECM-QM87R
- Page 1 ECM-QM87R/ ECM-QM87 Intel® 4th Generation Core™ Processor 3.5” Micro Module with Intel® Lynx Point Chipset User’s manual Ed – 12 December 2014 Part No. E2047391402R...
- Page 2 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 3 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
- Page 4 A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 ECM-QM87R/ ECM-QM87 User’s Manual...
-
Page 5: Table Of Contents
SATA power connector (SATA_PWR1) .................. 30 2.4.19 EC Debug connector (CN2)..................... 30 2.4.20 LVDS connector (JLVDS1) ...................... 31 2.4.21 On-board box header for USB3.0 (JUSB3/4) ................32 2.4.22 On-board box header for USB3.0 (JUSB5/6) ................32 ECM-QM87R/ ECM-QM87 User’s Manual 5... - Page 6 PCH-IO Configuration ....................55 3.6.3.1.1 PCI Express Configuration ..................55 3.6.3.1.1.1 PCI Express Root Port 1 ..................56 3.6.3.1.2 USB Configuration ....................57 3.6.3.1.3 PCH Azalia Configuration ..................57 3.6.3.2 System Agent (SA) Configuration ................58 6 ECM-QM87R/ ECM-QM87 User’s Manual...
- Page 7 Install USB 3.0 Driver (For Intel QM87) ............... 68 Install VGA Driver (For Intel QM87) ..............69 Install Audio Driver (For Realtek ALC892) ............70 Install Ethernet Driver (For Intel I217LM and I210AT) ......... 71 5. Mechanical Drawing ....................72 ECM-QM87R/ ECM-QM87 User’s Manual 7...
-
Page 8: Getting Started
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x 3.5” ECM-QM87R/ ECM-QM87 Micro Module 1 x AUX-056 daughter board ... -
Page 9: Document Amendment History
User’s Manual 1.3 Document Amendment History Revision Date Comment December 2014 Initial Release ECM-QM87R/ ECM-QM87 User’s Manual 9... -
Page 10: Manual Objectives
We strongly recommend that you study this manual carefully before attempting to interface with ECM-QM87R/ ECM-QM87 series or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance. -
Page 11: System Specifications
Single power ATX Support S0,S1, S3, S4, S5 ACPI ACPI 3.0 Compliant Operating Temp. 0°C ~ 60°C Storage Temp. -40°C ~ 75°C Operating Humidity 0%~90% relative humidity, non-condensing Size (L x W) 5.7" x 4" (146mm x 101mm) Weight 0.44lbs (0.2kg) ECM-QM87R/ ECM-QM87 User’s Manual 11... -
Page 12: Architecture Overview - Block Diagram
ECM-QM87R/ ECM-QM87 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of ECM-QM87R/ ECM-QM87. 12 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 13: Hardware Configuration
User’s Manual 2. Hardware Configuration ECM-QM87R/ ECM-QM87 User’s Manual 13... -
Page 14: Product Overview
ECM-QM87R/ ECM-QM87 2.1 Product Overview 14 ECM-QM87R/ ECM-QM87 User’s Manual... - Page 15 User’s Manual ECM-QM87R/ ECM-QM87 User’s Manual 15...
-
Page 16: Installation Procedure
Note: Make sure the heat sink and the CPU top surface are in total contact to avoid CPU overheating problem that would cause the system to hang or unstable 16 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 17: Main Memory
User’s Manual 2.2.1 Main Memory ECM-QM87R/ ECM-QM87 provides one 204-pin DDR3L SODIMM socket, supports up to 8GB DDR3L 1333/1600 SDRAM. SODIMM (Rear side) Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. - Page 18 (2) Static electricity can damage the electronic components of the computer or optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. 18 ECM-QM87R/ ECM-QM87 User’s Manual...
-
Page 19: Jumper And Connector List
COM 1 pin 9 signal select 3 x 2 header, pitch 2.00 mm JRI1 JAT1 AT/ ATX Input power select 3 x 1 header, pitch 2.00 mm JVR1 LCD backlight brightness adjustment 3 x 1 header, pitch 2.00 mm ECM-QM87R/ ECM-QM87 User’s Manual 19... - Page 20 1 x 4 wafer, pitch 2.50 mm SATA1 Serial ATA connector 1 SATA2 Serial ATA connector 2 SYS_FAN1 System fan connector 4 x 1 wafer, pitch 2.54 mm VGA connector D-sub 15-pin, female VGA1 Mini-PCI connector MPCIE2 DDR3 SODIMM connector 20 ECM-QM87R/ ECM-QM87 User’s Manual...
-
Page 21: Setting Jumpers & Connectors
User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS * Default 2.4.2 COM 1 pin 9 signal select (JRI1) Ring* +12V * Default ECM-QM87R/ ECM-QM87 User’s Manual 21... -
Page 22: At/ Atx Input Power Select (Jat1)
ECM-QM87R/ ECM-QM87 2.4.3 AT/ ATX Input power select (JAT1) * Default 2.4.4 LCD backlight brightness adjustment (JVR1) PWM Mode* DC Mode * Default 22 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 23: 5Vsb Connector In Atx (Pwr_Sb1)
User’s Manual 2.4.5 5VSB connector in ATX (PWR_SB1) Signal PSON_ATX# +ATX5VSB 2.4.6 Battery connector (BT1) Signal +3.3V ECM-QM87R/ ECM-QM87 User’s Manual 23... -
Page 24: Cpu Fan Connector (Cpu_Fan1)
ECM-QM87R/ ECM-QM87 2.4.7 CPU fan connector (CPU_FAN1) Signal +12V Tachometer0 FAN_PWM0 2.4.8 System fan connector (SYS_FAN1) Signal +12V Tachometer1 FAN_PWM1 24 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 25: Com 1 Rs-422-485 Mode (Rs422_1)
COM 1 RS-422-485 mode (RS422_1) Signal PIN PIN Signal 485_422TX1- 422RX1- 485_422TX1+ 422RX1+ Note: J422/485 is available after modify the mode of COM1 in BIOS setting 2.4.10 LCD inverter connector (JBKL1) Signal +12V BKLEN VBRIGHT ECM-QM87R/ ECM-QM87 User’s Manual 25... -
Page 26: Audio Connector (Jaudio1)
MIC1-JD LINE1-JD FRONT-JD MIC1-L-IN MIC1-R-IN LINE1-L-IN LINE1-R-IN FRONT-L-OUT FRONT-R-OUT 2.4.11.1 Signal Description – Audio connector (JAUDIO1) Signal Signal Description LINE1_JD AUDIO IN (LINE_RIN/LIN)sense pin FRONT_JD AUDIO Out(ROUT/LOUT) sense pin MIC1_JD MIC IN (MIC_RIN/LIN) sense pin 26 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 27: Low Pin Count Connector (Jlpc1)
Low pin count connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 LPC_RESET# LPC_AD2 LPC_LFRAME# LPC_AD3 CLK_PCI_LPC SERIRQ +V5S +V5A LPC_LDRQ0# 2.4.13 Serial port 2 connector (COM2) Signal PIN PIN Signal NDCDB# NRXDB NTXDB NDTRB# NDSRB# NRTSB# NCTSB# NRIB# ECM-QM87R/ ECM-QM87 User’s Manual 27... -
Page 28: General Purpose I/O Connector (Jdio1)
ECM-QM87R/ ECM-QM87 2.4.14 General purpose I/O connector (JDIO1) Signal PIN PIN Signal SMB_DATA_9555 10 SMB_CLK_9555 DIO_GP13 DIO_GP23 DIO_GP12 DIO_GP22 DIO_GP11 DIO_GP21 DIO_GP10 DIO_GP20 2.4.15 Miscellaneous setting connector (JFP1) Signal PWBT RST# PWR-LED- PWR-LED+ HDD-LED+ HDD-LED- COPEN# 28 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 29: Spi Connector (Jspi1)
User’s Manual 2.4.16 SPI connector (JSPI1) Signal Signal HOLD# SPI_SI SPI_SO SPI_CLK SPI_CS0# +3.3V 2.4.17 Power connector (PWR1) Signal PIN PIN Signal +12V +12V ECM-QM87R/ ECM-QM87 User’s Manual 29... -
Page 30: Sata Power Connector (Sata_Pwr1)
ECM-QM87R/ ECM-QM87 2.4.18 SATA power connector (SATA_PWR1) Signal 2.4.19 EC Debug connector (CN2) Signal EC_SMCLK_DEBUG EC_SMDAT_DEBUG 30 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 31: Lvds Connector (Jlvds1)
User’s Manual 2.4.20 LVDS connector (JLVDS1) Signal PIN PIN Signal +12V +12V LVDS_CLK2_N LVDS_CLK1_N LVDS_CLK2_P LVDS_CLK1_P LVDS_DATA7_N LVDS_DATA6_N LVDS_DATA7_P LVDS_DATA6_P LVDS_DATA5_N LVDS_DATA4_N LVDS_DATA5_P LVDS_DATA4_P LVDS_DATA3_N LVDS_DATA2_N LVDS_DATA3_P LVDS_DATA2_P LVDS_DATA1_N LVDS_DATA0_N LVDS_DATA1_P LVDS_DATA0_P +3.3V +3.3V ECM-QM87R/ ECM-QM87 User’s Manual 31... -
Page 32: On-Board Box Header For Usb3.0 (Jusb3/4)
USB3_RXN4_L USB3_RXP4_L USB3_TXN3_L USB3_TXP3_L USB3_TXN4_L USB3_TXP4_L USB_PN_Z_4 USB_PP_Z_4 USB_PN_Z_6 USB_PP_Z_6 2.4.22 On-board box header for USB3.0 (JUSB5/6) Signal PIN PIN Signal USBVCC4 USB3_RXN5_L USBVCC5 USB3_RXP5_L USB3_RXN6_L USB3_RXP6_L USB3_TXN5_L USB3_TXP5_L USB3_TXN6_L USB3_TXP6_L USB_PN_Z_8 USB_PP_Z_8 USB_PN_Z_10 USB_PP_Z_10 32 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 33: On-Board Box Header For Usb2.0 (Jusb7/8)
User’s Manual 2.4.23 On-board box header for USB2.0 (JUSB7/8) Signal PIN PIN Signal USBVCC6 USBVCC6 USB_PN_Z_12 USB_PN_Z_13 USB_PP_Z_12 USB_PP_Z_13 2.4.24 PS/2 keyboard & mouse connector (JKB/ MS1) Signal PIN PIN Signal KBCK KBDT KBVCC MSCK MSDT ECM-QM87R/ ECM-QM87 User’s Manual 33... -
Page 34: Audio / Usb Daughter Board User's Guide
LINEIN1 Line in connector Phone Jack AJAUDIO1 Audio connector 6 x 2 header, pitch 2.00mm 5 x 2 header, pitch 2.00mm AJUSB2 2.00mm USB connector AJUSB3 2.00mm USB connector 10 x 2 header, pitch 2.00mm 34 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 35: Setting Jumper And Connector
AUSB_PN1 AUSB_PP2 AUSB_PP1 ALINE1-L-IN ALINE1-R-IN AMIC1-L-IN AMIC1-R-IN ALINE1-JD AFRONT1-JD AMIC1-JD 2.00mm USB Connector (AJUSB3) Signal PIN PIN Signal AUSBVCC2 AUSB3_RXN1_L AUSBVCC3 AUSB3_RXP1_L 18 AUSB3_RXN2_L 17 AUSB3_RXP2_L AUSB3_TXN1_L AUSB3_TXP1_L 15 AUSB3_TXN2_L AUSB3_TXP2_L AUSB_PN3 AUSB_PP3 AUSB_PN4 AUSB_PP4 ECM-QM87R/ ECM-QM87 User’s Manual 35... -
Page 36: Bios Setup
ECM-QM87R/ ECM-QM87 3. BIOS Setup 36 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 37: Introduction
OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. Remove all storage can also enter the BIOS Setup Utility. ECM-QM87R/ ECM-QM87 User’s Manual 37... -
Page 38: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 38 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 39: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. ECM-QM87R/ ECM-QM87 User’s Manual 39... -
Page 40: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 40 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 41: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. ECM-QM87R/ ECM-QM87 User’s Manual 41... -
Page 42: Apci Settings
Wakeup by Ring Wakeup by Ring from S1~S5. Enabled Disabled[Default] 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Off[Default] PWRON After Select PWRON After PWR-Fail. PWR-Fail Former-Sts 42 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 43: S5 Rtc Wake Settings
Enable or disable System wake on alarm Disabled[Default], Wake system with Fixed Time event. When enabled, System will wake on the Enabled hr::min::sec specified. 3.6.2.3 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. ECM-QM87R/ ECM-QM87 User’s Manual 43... - Page 44 Enhanced C1 state. Enabled[Default] Disabled, CPU C3 Report Enable/Disable CPU C3 report to OS. Enabled[Default] Disabled, CPU C6 Report Enable/Disable CPU C6 report to OS. Enabled[Default] Short[Default] C6 Latency Configure Short/Long latency for C6. Long 44 ECM-QM87R/ ECM-QM87 User’s Manual...
-
Page 45: Sata Configuration
Enabled[Default] SATA Controller(s) Enable or disable SATA Device. Disabled SATA Mode Selection AHCI[Default] Determines how SATA controller(s) operate. RAID Disabled[Default] Indicates the maximum speed the SATA Gen1 SATA Controller Speed Gen2 controller can support. Gen3 ECM-QM87R/ ECM-QM87 User’s Manual 45... -
Page 46: Intel(R) Rapid Start Technology
Hard Disk Drive[Default] SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 3.6.2.5 Intel(R) Rapid Start Technology Item Options Description Enable or disable Intel® Rapid Start Disabled[Default], Intel® Rapid Start Technology Technology. Enabled 46 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 47: Pch-Fw Configuration
MDES BIOS Status Code Enable/Disable MDES BIOS Status Code. Enabled Firmware Update Configuration Configure Management Engine Technology Parameters. 3.6.2.6.1 Firmware Update Configuration Item Options Description Enable/Disable Me FW Image Re-Flash Disabled[Default] Me FW Image Re-Flash function. Enabled ECM-QM87R/ ECM-QM87 User’s Manual 47... -
Page 48: Amt Configuration
This option just controls the Disabled BIOS extension execution. If enabled, this requires additional firmware in the SPI device Un-Configure ME OEMFLag Bit 15: Un-Configure ME without password Enabled[Default] Disable ME Set ME to Soft Temporary Disabled. Disabled 48 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 49: Usb Configuration
This is a workaround for OSes without EHCI Enabled EHCI Hand-off hand-off support. The EHCI ownership change Disabled[Default] should be claimed by EHCI driver. Enabled[Default] Enable/Disable USB Mass Storage Driver USB Mass Storage Driver Support Disabled Support. ECM-QM87R/ ECM-QM87 User’s Manual 49... -
Page 50: Hardware Monitor
The following system temperature, fan speed and voltage are monitored. Temperature: System Temperature CPU Thermistor Temperature Fan Speed: System Fan Speed CPU Fan speed Voltage: VCORE +12V +5VSB AVCC 3VCC VSB3 VBAT 50 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 51: Super Io Configuration
3.6.2.10.1 and 3.6.2.10.2 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB). 3.6.2.10.1 Serial Port 1 Configuration ECM-QM87R/ ECM-QM87 User’s Manual 51... -
Page 52: Serial Port 2 Configuration
IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 Select an optimal setting for Change Settings IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 super IO device. IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12 Change the Serial Port Normal[Default] Device Mode mode. Select <High Speed> High Speed or <Normal mode> mode. 52 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 53: Network Stack
User’s Manual 3.6.2.11 Network Stack Item Option Description Enabled Network stack Enable/Disable UEFI network stack. Disabled[Default] Enabled Enable Ipv4/6 PXE Boot Support. If Ipv4/6 PXE Support Disabled[Default] disabled IPV4/6 PXE boot option will not ECM-QM87R/ ECM-QM87 User’s Manual 53... -
Page 54: Intel Rc Drivers Version Detail
ECM-QM87R/ ECM-QM87 be created. 0[Default] Wait time to press ESC key to abort the PXE boot wait time PXE boot. 0[Default] Media detect time Enable/Disable UEFI network stack. 3.6.2.12 Intel RC Drivers Version Detail 3.6.3 Chipset 54 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 55: Pch-Io Configuration
Disabled PCH LAN Controller Enable or disable onboard NIC. Enabled[Default] Disabled 1-2 Seconds Select a minimum assertion width SLP_S4 Assertion Width 2-3 Seconds of the SLP_S4# signal. 3-4 Seconds 4-5 Seconds[Default] 3.6.3.1.1 PCI Express Configuration ECM-QM87R/ ECM-QM87 User’s Manual 55... -
Page 56: Pci Express Root Port 1
PCI Express Root Port 1/2/7 Enabled[Default] Port. Disabled Set the ASPM Level: Force L0s-Force all links to L0s State: ASPM Support AUTO-BIOS auto configure: L0sL1 DISABLE-Disables ASPM. Auto[Default] Auto[Default] PCIe Speed Gen1 Select PCI Express port speed. Gen2 56 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 57: Usb Configuration
3.6.3.1.2 USB Configuration Item Option Description Smart Auto[Default] Mode of operation of xHCI xHCI Mode Disabled controller. USB Ports Per-Port Disable Disabled[Default] Control each of the USB ports Control Enabled (0~13) disabling. 3.6.3.1.3 PCH Azalia Configuration ECM-QM87R/ ECM-QM87 User’s Manual 57... -
Page 58: System Agent (Sa) Configuration
Enabled Auto = Azalia will be enabled if present, disabled Auto[Default] otherwise. 3.6.3.2 System Agent (SA) Configuration 3.6.3.2.1 Graphics Configuration Item Option Description Graphics turbo IMON current Graphics Turbo IMON Current 14 ~31[Default] values supported (14 -31). 58 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 59: Lcd Control
POST. This has no effect if external graphics present. Secondary Primary IGFX Boot Display HDMI boot display selection will appear based LVDS on your selection. VGA modes will be supported only on primary display. ECM-QM87R/ ECM-QM87 User’s Manual 59... - Page 60 Select LVDS back light PWM duty. 100% 200 Hz[Default] 300 Hz 400 Hz 500 Hz 700 Hz LVDS Back Light PWM 1 kHz Select LVDS back light PWM Frequency. Frequency 2 kHz 3 kHz 5 kHz 10 kHz 20 kHz 60 ECM-QM87R/ ECM-QM87 User’s Manual...
-
Page 61: Memory Configuration
Select the Keyboard NumLock state Bootup NumLock State Off[Default] Disabled Enables or disables Quiet Boot option Quiet Boot Enabled[Default] Disabled[Default] Enables or disables boot with Fast Boot Enabled initialization of a minimal set of devices ECM-QM87R/ ECM-QM87 User’s Manual 61... -
Page 62: Csm Parameters
Launch Video OpROM policy UEFI only and Legacy Video OpROM. Legacy only[Default] For PCI devices other than UEFI OpROM[Default] Other PCI device ROM priority Network, Mass storage or Video Legacy OpROM defines which OpROM to launch. 62 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 63: Security
User’s Manual 3.6.5 Security Administrator Password Set setup Administrator Password User Password Set User Password ECM-QM87R/ ECM-QM87 User’s Manual 63... -
Page 64: Save And Exit
Exit system setup after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 64 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 65: Drivers Installation
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. ECM-QM87R/ ECM-QM87 User’s Manual 65... -
Page 66: Install Chipset Driver (For Intel Qm87)
If the warning message Step 3. Click Next. appears while the installation process, click Continue to go on. Step1. Click Next.. Step 4. Click Next. Step 2. Click Yes. Step 5. Click Finish to complete setup. 66 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 67: Install Me Driver (For Intel Qm87)
Step 3. Click Next to proceed setup. process, click Continue to go on. Step1. Click Next to start installation. Step 4. Click Finish to complete setup. Step 2. Click Yes to accept license agreement. ECM-QM87R/ ECM-QM87 User’s Manual 67... -
Page 68: Install Usb 3.0 Driver (For Intel Qm87)
Step 3. Click Next to continue installation. appears while the installation process, click Continue to go on. Step 4. Click Next to continue installation. Step1. Click Next to start installation. Step 5. Click Finish to complete setup. Step 2. Click Yes. 68 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 69: Install Vga Driver (For Intel Qm87)
Windows XP operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. ECM-QM87R/ ECM-QM87 User’s Manual 69... -
Page 70: Install Audio Driver (For Realtek Alc892)
\Driver_Audio\Realtek\ALC892\ECM-QM87_Audio. Note: The installation procedures and screen shots in this section are based on Windows 7 operation system. Step 1. Click Next to continue setup. Step 2. Click Finish to complete the setup. 70 ECM-QM87R/ ECM-QM87 User’s Manual... -
Page 71: Install Ethernet Driver (For Intel I217Lm And I210At)
Step 3. Click Next after choosing features based on Windows 7 operation to install. system. Step 4. Click Install to proceed. Step 1. Click Next. Step 2. Click Next to accept license Step 5. Click Finish to complete the setup agreement. ECM-QM87R/ ECM-QM87 User’s Manual 71... -
Page 72: Mechanical Drawing
ECM-QM87R/ ECM-QM87 5. Mechanical Drawing 72 ECM-QM87R/ ECM-QM87 User’s Manual... - Page 73 User’s Manual Unit: mm ECM-QM87R/ ECM-QM87 User’s Manual 73...
- Page 74 ECM-QM87R/ ECM-QM87 Unit: mm 74 ECM-QM87R/ ECM-QM87 User’s Manual...
- Page 75 Contact details The Netherlands Belgium UK & Ireland Elektrostraat 17 Zuiderlaan 14 bus 10 St. Mary’s House, Church Lane NL-7483 PG Haaksbergen B-1731 Zellik Carlton Le Moorland Lincoln LN5 9HS +31 (0)53 573 33 33 +32 (0)2 462 01 00 +44 (0)1522 789 555 F: +31 (0)53 573 33 30 +32 (0)2 462 01 25...
Need help?
Do you have a question about the ECM-QM87R and is the answer not in the manual?
Questions and answers