Adaptec Storage Manager User Manual page 87

Chapter 9: Managing Logical Drives and Hot Spares
An X indicates that the selected disk drive will be removed from the
logical drive, and you are prompted to select another disk drive (of
greater or equal size) to replace it.
Flashing arrow prompts you to replace the deselected disk drive
Modify the Advanced Settings, if required. (See
6
Drives on page
Click Next.
7
Review the new logical drive settings. To make changes, click Back.
8
Note: Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
To update your logical drive immediately, click Apply, then click Yes.
9
78.)
Fine-tuning Logical
86