Changing A System's Event Log Setting; Changing A System's Agent Base Port Number - Adaptec Storage Manager User Manual

Step 5: Customizing Adaptec Storage Manager

Changing a System's Event Log Setting

By default, all Warning- and Error-level events on a system are recorded
in the operating system event log.
To disable operating system event logging on a system:
Click the Configure button, select the system you want, then click
1
General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system. (See
Deselect Save events in OS event log.
2
Click Save changes.
3
Restart Adaptec Storage Manager to apply the new setting.
4

Changing a System's Agent Base Port Number

Adaptec Storage Manager uses four consecutive ports to access remote
systems: 34571, 34572, 34573, and 34574. The default port number for
the agent is 34571. If your system has a conflict with these ports, change
the base port to a different port number.
To change the agent base port number:
Click the Configure button, select the system you want, then click
1
General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system. (See
Enter a new agent system base port number.
2
Click Save changes.
3
Restart Adaptec Storage Manager and the Adaptec Storage Manager
4
agent to apply the new setting.
Step 1 on page 68.)
Step 1 on page 68.)
69