Silencing And Testing The Audible Alarm; Testing The Alarm - Adaptec Storage Manager User Manual

Silencing and Testing the Audible Alarm

By default, when a Warning- or Error-level event (see
on any system in the Enterprise View, an audible alarm is triggered on
the local system. The alarm is a series of beeps, which sound every five
minutes until the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. See
Settings on page 67
This section describes how to:
Ensure the alarm is working on your local system (see below).
Silence a sounding alarm (see
Disable the alarm for a selected controller (see

Testing the Alarm

To test the audible alarm to ensure that it's working on your local
system:
Ensure that the speakers on your local system aren't muted.
1
In the Enterprise View, click on any controller.
2
In the menu bar, click Actions, select Alarm Actions, then click Test
3
alarm.
The alarm sounds.
To stop the test, click OK.
4
Chapter 11: Monitoring Your Storage Space
for more information.
page
Changing a System's Audible Alarm
122).
page
121
page 101) occurs
122).