Including More Systems In Your Storage Space - Adaptec Storage Manager User Manual

Click Apply, then click Yes.
10
Adaptec Storage Manager builds the logical drive(s). The
configuration is saved on the Adaptec controller and on the physical
drives.
Repeat Steps 1
11
Partition and format your logical drives. See
12
information.
If your storage space comprises one or more Adaptec RAID controllers
on a single computer, building is complete. Continue with
Your Storage Space on page
If you have installed Adaptec RAID controllers on more than one
computer and wish to add them to your storage space, continue with

Including More Systems in Your Storage Space

Including More Systems in Your Storage Space
If you have installed Adaptec RAID controllers on more than one
computer, to continue building your storage space:
From each individual computer, log in to Adaptec Storage Manager
and repeat Steps
From your local system, log in to all the other computers as remote
systems (see page
your storage space.
Note: The maximum number of supported RAID controllers varies
depending on your operating system. See
page 59 for more information.
When your storage space is complete, continue with
Storage Space on page
Step 4: Building Your Storage Space
to 10 for each controller on your system.
59.
1 to 12 to continue building your storage space, or
61), then repeat Steps
59.
page 50 for more
below.
1 to 12 to continue building
RAID Controller Support on
Managing Your
55
Managing