Completing A Silent Installation (Advanced) - Adaptec Storage Manager User Manual

Completing a Silent Installation (Advanced)

A silent installation uses command line parameters to complete an
installation without messages or user interaction.
To complete a silent installation:
Insert the Adaptec Storage Manager CD into your CD drive.
1
Open a command prompt window and change to the CD directory.
2
Install Adaptec Storage Manager using this command line string:
3
setup.exe /s /v" /qn <OPTIONS>"
This table describes the command line options. Multiple features
can be separated with commas.
Option
INSTALLDIR
ADDLOCAL
REBOOT
Step 1: Installing Adaptec Storage Manager
Required Values
Yes
\"path to installation directory\"
The installation path must be enclosed in
escaped quotation marks.
For example:
INSTALLDIR=\"C:\Program Files\Adaptec\
Adaptec Storage Manager\"
No All—(Default) Installs all features.
Manager—Installs Adaptec Storage
Manager.
SNMPSupport—Installs SNMP support;
requires Manager feature. (See
more information.)
ASMReadme—Installs the Readme file and
Start menu shortcut.
CLITools—Installs Command Line
Interface tools.
Note: Use commas to separate multiple
features.
No Force—(Default) Forces a reboot at the
end of the installation.
Suppress—Suppresses a reboot unless files
were in use and could not be overwritten
during installation.
ReallySuppress—Suppresses all reboots at
the end of the installation.
26
page 153 for