Clearing The Event Log; What Do The Status Icons Mean - Adaptec Storage Manager User Manual

Clearing the Event Log

To clear the event log of all recorded activity:
In the menu bar of the main Adaptec Storage Manager window, click
1
Actions, select Agent actions, then click Clear the configuration
event log.
Click Yes to clear the log.
2
The log is cleared, except for one event reporting that the log was
cleared.

What Do the Status Icons Mean?

Adaptec Storage Manager indicates event status with icons. The Table
below lists the three categories, or types, of events based on severity.
Icon Status
Information
Warning
Error
Warning- and Error-level icons appear next to components (such as
systems and logical drives) affected by a failure or error, creating a trail,
or rapid fault isolation, that helps you identify the source of a problem
when it occurs. See
147 for more information.
Note: All Warning- and Error-level events also cause the audible alarm
to sound. See page 121
Chapter 11: Monitoring Your Storage Space
Examples
The local system successfully connected to a remote
system; a logical drive was created; a hot spare was
created; a logical drive was deleted.
A logical drive is in a degraded state; a disk drive is
being rebuilt.
A controller has failed; a logical drive has failed; a hot
spare has failed; a disk drive within a logical drive has
failed.
Identifying a Failed or Failing Component on page
for more information.
102