Configuring Snmp Support On Windows - Adaptec Storage Manager User Manual

Configuring SNMP Support on Windows

Note: Be sure your Windows installation includes SNMP support. By
default, Windows 2000 and Windows XP do not install SNMP.
To install and configure SNMP support:
Run the Adaptec Storage Manager installation program (see
1
When prompted, select Yes, install SNMP support.
2
Follow the on-screen instructions to complete the installation, then
3
restart your computer.
Open the Windows Computer Management tool, then select
4
Services from the tree.
Double-click SNMP Service.
5
The SNMP Service Properties window opens.
Click the Traps tab, then enter the IP address of each computer on
6
which you want to enable traps.
Click OK.
7
Start the SNMP service.
8
Appendix A: Configuring SNMP Support
154
page 25).