Starting the Agent on Linux
On systems running Linux, the Adaptec Storage Manager agent starts
automatically when the system is powered on.
To verify that the agent is running:
Open a shell window.
1
Enter this command:
2
If the agent is running, it's listed as
3
Manage and monitor the system by logging into it as a remote
4
system (see
page
The Adaptec Storage Manager agent's default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see
Starting the Agent on NetWare
To start the agent:
From the NetWare console, type:
1
Press Enter.
2
Manage and monitor the system by logging into it as a remote
3
system (see
page
The Adaptec Storage Manager agent's default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see
Step 2: Starting Adaptec Storage Manager
ps -ef | grep StorAgnt.sh
61).
page
67.
61).
page
67.
.
sh StorAgnt.sh
LOAD RaidAgnt
34