Managing The Event Notification List - Adaptec Storage Manager User Manual

If the test fails:
Ensure that the receiving system is powered on and running
a
Adaptec Storage Manager.
Open the receiving system's System Properties window (see
b
Step 3 on page
port number.
Try sending the test event again.
c

Managing the Event Notification List

This section describes how to manage systems in the Notification List:
To add a system to the Notification List, see
To modify a system's connection information, see
To remove a system from the Notification List, see
Modifying a System's Address or Host Name
If the TCP/IP information or host name of a system changes, update its
properties in the Notification Manager.
Note: Does this system receive event notifications from more than one
other system? Ensure you enter the updated information in the
Notification Manager of all affected systems.
To modify system information:
Open the Notification Manager. (See
1
In the Notification List, click on the system you want to modify.
2
In the System Properties window, enter the new information, then
3
click OK.
The Notification List shows the modified information.
Chapter 11: Monitoring Your Storage Space
107) and double-check the TCP/IP address and
page 104.
page
page
page 104.)
107
107.
108.