Rescanning A Controller; Registering New Controllers - Adaptec Storage Manager User Manual

Chapter 15: Managing Controllers and Disk Drives

Rescanning a Controller

After you connect a disk drive to or remove a 'Ready' (non-failed) disk
drive from a controller, Adaptec Storage Manager may not recognize
the change until it rescans the controller.
To rescan a controller:
In the Enterprise View, click the controller.
1
In the menu bar, select Actions, then click Rescan.
2
Adaptec Storage Manager scans all the channels or ports on the
controller you selected.
When the scan is complete, a report appears.
Click Done after you have reviewed the scan report.
3

Registering New Controllers

When you log in to Adaptec Storage Manager, it searches for new
controllers in your storage space. If it detects a new controller, you are
prompted to register it.
To stay informed about Adaptec products and special offers, register
your controllers by clicking Register Now.
Follow the on-screen instructions to complete the registration.
140