Broadcasting Event Alerts To Users - Adaptec Storage Manager User Manual

Broadcasting Event Alerts to Users

You can set the Adaptec Storage Manager agent to send event alerts
about a specific system to all users who are logged into your storage
space. You might want to do this if your storage space isn't managed by
a dedicated person, or if that particular system is off-site or not
connected to a monitor. Event alerts signal everyone working on the
storage space that a system requires technical assistance.
When you set Adaptec Storage Manager to broadcast event alerts, all
logged-in users receive messages about all types of events. In Windows,
these alerts appear as pop-up messages; in all other operating systems,
these alerts appear as console messages.
When enabled, event alerts occur independent of event notifications
(see page 103) and email notifications (see
To enable event alerts:
On the tool bar, click the Configure button, select the system you
1
want, then click General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system.
Select Broadcast events to logged-in users, then click Save changes.
2
Restart Adaptec Storage Manager to apply the change.
3
Chapter 11: Monitoring Your Storage Space
page 111).
120