Creating a Snapshot with Backup
To create a snapshot with backup:
In the Logical Devices View, right-click the logical drive you want to
1
copy.
Select Create snapshot, click with backup to, then click the name of
2
the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
Creating a Snapshot Without Backup
To create a snapshot without backup:
In the Logical Devices View, right-click the logical drive you want to
1
copy.
Select Create snapshot, click without backup to, then click the name
2
of the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
Use an operating system-level or third-party data backup tool to
3
move the snapshot onto a tape drive or other server.
Deleting a Snapshot
When a snapshot is no longer needed, you can delete it from Adaptec
Storage Manager.
To delete a snapshot:
In the Logical Devices View, right-click the snapshot you want to
1
delete.
Click Remove snapshot.
2
The snapshot is deleted.
Chapter 10: Protecting Your Data
97