Recommended Peripheral Devices - YASKAWA VS MINI J7 Series Instruction Manual

All manuals and user guides at all-guides.com

• Recommended Peripheral Devices

It is recommended that the following periheral devices be mounted between the AC
main circuit power supply and VS mini J7 input terminals R/L1, S/L2, and T/L3.
• MCCB (Molded-case circuit breaker):
A circuit breaker should be connected for wiring protection.
• Magnetic contactor:
Mount a surge suppressor on the coil (refer to the table shown below).
To assure optimum inverter life when using a magnetic contactor to start and stop
the inverter, do not exceed one stop per hour.
Recommended MCCB and magnetic contactor
• 200V 3-Phase
VS mini J7 model
Capacity
Rated Output Current
MCCB type NF30
(MITSUBISHI)
Magnetic contactor type HI
(YASKAWA CONTROL)
• 200V single-Phase
VS mini J7 model
Capacity
Rated Output Current
MCCB type NF30, NF50
(MITSUBISHI)
Magnetic contactor type HI
(YASKAWA CONTROL)
• 400V 3-Phase
VS mini J7 model
Capacity
Rated Output Current
MCCB type NF30, NF50
(MITSUBISHI)
Magnetic contactor type HI
(YASKAWA CONTROL)
J7 * * J7 * * J7 * *
20P1 20P2 20P4
(kVA) 0.3 0.6 1.1
(A) 0.8 1.6 3
5A 5A 5A
HI-7E HI-7E HI-7E
J7 * * J7 * *
B0P1 B0P2
(kVA) 0.3 0.6
(A) 0.8 1.6
5A 5A
HI-7E HI-7E
J7 * * J7 * *
40P1 40P2
(kVA) 0.9 1.4
(A) 1.2 1.8
5A 5A
HI-7E HI-7E
J7 * * J7 * * J7 * *
20P7 21P5 22P2
1.9 3.0 4.2
5 8 11
10A 20A 20A
HI-7E HI-10-2E HI-10-2E
J7 * * J7 * *
B0P4 B0P7
1.1 1.9
3 5
10A 20A
HI-7E HI-10-2E
J7** J7 * * J7 * *
40P4 41P5 42P2
2.6 3.7 4.2
3.4 4.8 5.5
5A 10A 10A
HI-7E HI-10-2E HI-10-2E
J7 * *
23P7
6.7
17.5
30A
HI-20E
J7 * *
B1P5
3.0
8
20A
HI-15E
J7 * *
43P7
7.0
9.2
20A
HI-10-2E
43