Specifications; Standard Specifications (200V Class) - YASKAWA VS MINI J7 Series Instruction Manual

All manuals and user guides at all-guides.com

3. Specifications

• Standard Specifications (200V Class)

Voltage Class
Model
CIMR-J7AU!!!!
Single-phase
Max. Applicable Motor Output HP (kW)†
Inverter Capacity (kVA)
Rated Output Current (A)
Max. Output Voltage (V)
(3-phase output only)
Max. Output Frequency (Hz)
Rated Input Voltage and
Frequency
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation ±5%
Control Method
Frequency Control Range
Frequency Accuracy
(Temperature Change)
Frequency Setting Resolution
Output Frequency Resolution
Overload Capacity
Frequency Reference Signal
Accel/Decel Time
Braking Torque
V/f Characteristics
† Based on a standard 4-pole motor for max. applicable motor output.
‡ Shows deceleration torque for uncoupled motor decelerating from 60Hz with the shortest possible
deceleration time.
3-phase 20P1 20P2
B0P1 B0P2
0.13
(0.1)
0.3
0.8
3-phase models, 200 to 230V (proportional to input voltage)
Single-phase models, 200 to 240V (proportional to input
voltage)
400 Hz (Programmable)
3-phase, 200 to 230V, 50/60Hz
Single-phase, 200 to 240V, 50/60Hz
-15 to +10%
Sine wave PWM (V/f control)
0.1 to 400Hz
Digital reference: ±0.01% (-10 to +50°C)
Analog reference: ±0.5% (25±10°C)
Digital reference: 0.1Hz (less than 100Hz) / 1Hz (100Hz or
more)
Analog reference: 1 / 1000 of max. output frequency
0.01Hz
150% rated output current for one minute
0 to 10VDC (20kΩ), 4 to 20mA (250Ω), 0 to 20mA (250Ω)
Frequency setting volume (Selectable)
0.1 to 999sec.
(accel/decel time are independently programmed)
Short-term average deceleration torque‡
0.13HP, 0.25HP (0.1, 0.25kW): 150%
0.5HP, 1HP (0.55, 1.1kW): 100%
2HP (1.5kW): 50%
3HP (2.2kW) or more: 20%
Continuous regenerative torque: Approx. 20%
Possible to program any V/f pattern
200V single- / 3-phase
20P4 20P7 21P5
B0P4 B0P7 B1P5
0.25 0.5 1 2
(0.2) (0.4) (0.75) (1.5)
0.6 1.1 1.9 3.0
1.6 3 5 8
22P2 23P7
- -
3 5
(2.2) (3.7)
4.2 6.7
11 17.5
15