YASKAWA VS MINI J7 Series Instruction Manual page 32

Register
No. for
No. Name
Trans-
mission
70 0146H Slave address
71 0147H Baud rate selection
72 0148H Parity selection
73 0149H Send waiting time
74 014AH RTS control
75
76
77
78 014EH Fault history
79 014FH Software No.
1. Upper limit of setting range and initial setting are doubled at 400 class.
2. Changes depending on inverter capacity. Refer to the next page.
3. Initial setting of the model with digital operator (without volume) is 1.
Setting can be set to 0 by parameter initialization.
32
All manuals and user guides at all-guides.com
Setting unit: 1
Setting range: 0 ~ 32
0: 2400 bps
1: 4800 bps
2: 9600 bps
3: 19200 bps
0: Even parity
1: Odd parity
2: No parity
Setting unit: 1 = 1ms
Setting range: 10 ~ 65 ms
0: RTS control enabled.
1: RTS control disabled.
0: Execution completed / execution
command receive condition
1: READ execute
2: COPY execute
3: VRFY execute
4: kVA display
5: Software No. display
0: READ prohibited.
1: READ allowed.
The 1 newest event is displayed
(Note) Setting is disabled.
Lower 3 digits of software numbers are
displayed.
(Note): Setting is disabled.
Initial
Setting
0
2
0
10ms
0
–
-
-
User Ref.
Setting Page
-
-
-
-
-
54
-