YASKAWA VS MINI J7 Series Instruction Manual page 117

EU Manufacturer's Declaration
Products
Static inverter, series VS mini J7
Scope
YASKAWA inverters are components (BDM*, defined by IEC 22g/21CDV) designed exclusively
for installation in machines or systems (end products) by qualified re-users (e.g. mechanical
engineering manufacturers).
Responsibility
As a component manufacturer we are responsible for the provision of installation instructions. These
can be found in the installation guidelines publication G-TI#99012-V7 (a Yaskawa publication free
upon request).
Our products have been tested by authorized bodies pursuant to the requirements of the standard
listed below. The products conform to these standards listed below. The products conform to these
standards listed below. The products conform to these standards, subject to due and proper
observation of the installation instructions provided in section 10 of this manual:
Immunity - EMC resistance pursuant to EN50082-2 (1995)
Emission - EMC interference emissions pursuant to EN500081-2 (1993)
YASKAWA Electric Europe GmbH
Am Kronberger Hang 2
65824 Schwalbach am Taunus
Germany
Always observe all the safety instructions provided in this product documentation!
*AdÜ: Abkürzung bitte kontrollieren.
117
All manuals and user guides at all-guides.com
ENV50204 (1995)
EN61000-4-2 (1996)
EN61000-4-4 (1995)
EN61000-4-6 (1996)
EN61000-4-8 (1994)
EN55011 (1991) Class B Group 1
Up to 10m motor cable
Class A Group 1
Up to 20m motor cable