Dmx Mode; Dmx Configuration; Screen - ProLights MINIECLFRTU-DY User Manual

3.4 DMX MODE

• Press rotary knob to access the main menu.
• Rotate knob to scroll the menu, select Connect, then press the rotary knob to enter the next menu.
• Press on UP / DOWN to select DMX ADDRESS, and press the rotary knob to confirm.
• Rotate knob and press on UP/DOWN to select the desired value (001-512).
• Press rotary knob to store.
• Rotate knob and press on ← to go back or to meet the waiting time to exit the setup menu.
To able to operate the MINIECLFRTU-DY with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the MINIECLFRTU-DY. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Numero Indirizzo di
canali DMX start (esempio)
5 33

3.5 DMX CONFIGURATION

MINIECLFRTU-DY is equipped with different DMX configuration.
• Press rotary knob to access the main menu.
• Rotate knob to scroll the menu, select Connect, then press the rotary knob to enter the next menu.
• Rotate knob to select DMX MODE, and press the rotary knob to confirm.
• Select the desired DMX configuration (EASY-1Ch, BASIC-2Ch 1, BASIC-2Ch 2, BASIC-3Ch, STANDARD–5CH) through
the rotary knob.
The tables on page 13 indicate the operating mode and DMX value.

3.6 SCREEN

You can change the following parameters related to the display, following the same procedure:
• Press rotary knob to access the main menu.
• Rotate knob to scroll the menu, select Set Up, then press the rotary knob to enter the next menu.
• Rotate knob to scroll through the menu, then select Screen, and press the rotary knob to enter the next
menu.
• Rotate knob to scroll through the menu, and then select one of the following settings for the display
and press the rotary knob to display it.
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display always on select
On or choose another value to turn off the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-
able this function.
• Press the rotary knob to confirm your choice.
• Rotate knob and press on ← to go back or to meet the waiting time to exit the setup menu.
MINIECLFRTU - DY
Indirizzo DMX Prossimo indirizzo di start
occupati possibile per unità n°1
33 - 37
Prossimo indirizzo di start
possibile per unità n°2
38
Prossimo indirizzo di start
possibile per unità n°3
43
9
48