7
MINIECLFRTU - DY
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
To turn on the MINIECLFRTU-DY connect the supplied main cable to a socket (100-240 VAC-50/60 Hz).
Then the unit is ready for operation.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
ATTENTION - Mains voltage must be switched off before mounting; maintenance; insert and replace
Adaptors; spots and luminaires.
3.2 BASIC
Access control panel functions using the rotary knob located directly on the left the LED Display (fig.5).
Fig.4- Functions of the buttons