2 Installation
2.2 Hardware installation
2.2 Hardware installation
Component list
The following items are supplied with the SmarTac option:
The SmarTac option can be purchased as stand-alone, without any hardware.
Required tools
The following tools are required to install the SmarTac option:
Installation
See the documentation for your sensor for the correct hardware setup and
diagnostics.
16
•
SmarTac printed circuit board with mounting hardware and safety cover
(optional).
•
SmarTac software for RobotWare Arc
•
Relevant electrical schematics (optional).
Note
•
Terminal block screwdriver
•
Multi-meter
•
Wire cutters
•
Wire strippers
© Copyright 2004-2016 ABB. All rights reserved.
Application manual - SmarTac
3HAC024845-001 Revision: A