Exercise 5: Object Frame Manipulation - ABB SmarTac Applications Manual

4 User's guide

4.7.3 Exercise 5: object frame manipulation

4.7.3 Exercise 5: object frame manipulation
About the exercise
In this exercise a two dimensional example will be used, as in exercise 4. There
will be four searches for this technique, so the plate will have to be clamped so
that most of the plate is off the table.
xx1400001510
Continues on next page
62
© Copyright 2004-2016 ABB. All rights reserved.
Application manual - SmarTac
3HAC024845-001 Revision: A