User's Guide; Safety - ABB SmarTac Applications Manual

4 User's guide

4.1 Safety

Safety instructions
Failure to follow safety guidelines presented throughout this manual can result
in property damage, serious injury, or death!
The SmarTac board is typically supplied with 230 VAC from the robot main power
transformer. This supply power is potentially dangerous. Consequently, the control
cabinet door should always be closed when the control cabinet is turned on. Only
qualified technicians should ever attempt trouble shooting.
The SmarTac sensing voltage applied at the torch when searching is supplied by
a 38 VDC, low current source. This sensing current is harmless.
All users must read the safety instructions in the product manual for the controller
and the robot before operating the robotic system. See
Application manual - SmarTac
3HAC024845-001 Revision: A
WARNING
CAUTION
© Copyright 2004-2016 ABB. All rights reserved.
4 User's guide
4.1 Safety
Safety on page 10.
33