Temperature Unit; Weight Unit; Logo; Change Code - Miele PWM 908 Operating And Installation Instructions

Temperature unit

You can select the unit for the temper-
ature display.
Factory default: °F

Weight unit

You can decide whether load quanti-
ties are displayed in "kg" or "lbs". You
can also switch this information off al-
together.
Factory default: lbs

Logo

You can choose whether the "Miele
Professional" logo or your own logo
appears in the display.
The option Laundromat ext. (12
prog) must be selected for the set-
ting .

Controls

Change code

You can alter the access code to the
Supervisor level.
 Enter the current code.
 Enter a new code.
Supervisor level

Program selection

Controls
You can select whether the washing
machine is operated as a "wash-sa-
lon" (launderette) machine. Shortcuts
are the easiest way to operate the ma-
chine. Operating staff are unable to
change pre-set programs.
Tip: Start by configuring all necessary
settings and changes to the washing
machine before adjusting any of the op-
tions below.
If "Laundromat, basic" or "Laundromat,
ext." are selected, the Supervisor level
can no longer be opened from the dis-
play after the Supervisor level is closed.
Please follow the instructions below if
you wish to change any other settings.
Opening the Supervisor level (laundro-
mat version)
 Switch on the washing machine and
open the door.
 Touch the Start/Stop sensor control
and hold it down whilst carrying out
steps –.
 Close the washing machine door.
 The Start/Stop sensor control will
now be flashing quickly; wait until it
lights up constantly.
 Release the Start/Stop sensor con-
trol when the Start/Stop sensor con-
trol lights up constantly.
83