Clock Display; Date; Volume; Visibility Parameters - Miele PWM 908 Operating And Installation Instructions

Clock display

After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock
– 12 h clock
– No clock
Set
– The time can be set.

Date

The date can be set after selecting the
date format.
Date format
– DD.MM.YYYY
– YYYY.MM.DD
– MM.DD.YYYY
Date
– The date can be set.
Supervisor level

Volume

The volume for various sounds can be
changed.
– Finish tone
– Keypad tone
– Welcome tone
It can be set to one of 7 different lev-
els or switched off altogether.
– Fault alarm
The fault alarm can be activated or
deactivated.

Visibility parameters

Various parameters, such as the tem-
perature, spin speed, extra options,
etc., are displayed when a program is
selected. You can decide which pa-
rameters should not be displayed.
These parameters can then not be
edited during program selection.
Factory default: All parameters are visi-
ble (marked in orange)
Sort extras
Under the setting
Sort Extras appears in the bottom line.
Touch the sensor control to change
the sequence of extra options (see
"Arranging programs" under "Supervi-
sor level").
Visibility parameters
,
81