Extra Options; Pre-Wash; Pre-Rinse; Rinse Plus - Miele PWM 908 Operating And Installation Instructions

You can add extra options to the wash
programs.
Not all extra options can be selected
with every program. If an extra option is
not listed, it is not permitted for use
with the wash program in question.
Selecting extra options
 Touch the
Extras
 Select one or more of the extra op-
tions available.
 Confirm with the OK sensor control if
several extra options are available.
Pre-wash 
A pre-wash can be added for heavily
soiled laundry. Coarse soiling is loos-
ened and removed before the main
wash.
Pre-rinse 
The laundry is rinsed before the main
wash to remove larger quantities of soil-
ing, e.g., dust, sand.
Rinse plus 
An extra rinse can be activated to
achieve a more thorough wash result.
Soak 
For heavily soiled and stained items
with protein stains. The soak duration is
10 minutes.
sensor control.
Intensive 
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is in-
creased through more intense mechani-
cal action and the application of more
heat energy.
Water plus 
The water level in the main wash and
the rinses will be increased.
SoftSteam 
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the program. Reducing the maxi-
mum load by 50% will achieve a better
result. Small loads achieve a better re-
sult.
The textiles must be suitable for drying
in a tumble dryer   and suitable for
ironing .
Rinse hold 
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the laun-
dry is not going to be removed from the
drum immediately after the end of the
program.
Starch stop 
Water is drained out of the machine be-
fore the last rinse and the program
stops. The prepared starch is added di-
rectly to the drum. The program is con-
tinued with the Start/Stop sensor con-
trol.

Extra options

47