Miele PWM 908 Operating And Installation Instructions page 29

Table of Contents

Advertisement

 Close the lid and press it firmly shut.
 Close the detergent dispenser
drawer.
The cap is opened by the act of in-
serting it in the detergent dispenser
drawer. The contents can run out of
the cap if you then remove it from
the drawer before it is used.
Dispose of opened caps.
5. Adding detergent
The wash program will dispense the
contents of the cap at the correct time.
When using CapDosing, water intake
to the  compartment takes place
solely via the cap.
When using caps, do not add extra
fabric softener to the  compart-
ment.
 Remove the empty cap at the end of
the program.
For technical reasons, a small amount
of water will remain in the cap.
Deactivating or changing CapDosing
CapDosing can only be deactivated or
changed prior to the program start.
 Touch the
CapDosing
and disable the selected cap option.
External dispensing
The washing machine is pre-equipped
for connecting to external detergent
dispensing systems. A separate conver-
sion kit for external dispensing systems
is required. This must be installed by
Miele Technical Service or by a Miele
Service dealer.
 sensor control
29

Advertisement

Table of Contents
loading

Table of Contents