Adding Fabric Softener Or Liquid Starch Separately; Adding Starch Separately - Miele PWM 908 Operating And Installation Instructions

Adding fabric softener or liquid
starch separately
 Select the Separate Rinse program.
 Change the spin speed if necessary.
 Add the fabric softener or the liquid
starch to the  compartment. Do not
exceed the maximum level mark.
 Touch the Start/Stop sensor control.
This will be automatically dispensed in
the final rinse. At the end of the pro-
gram, a small amount of water remains
in the  compartment.
5. Adding detergent

Adding starch separately

 Prepare the starch solution in accor-
dance with the manufacturer's in-
structions on the packaging.
 Select the Starch program.
 Add the prepared starch to the
 compartment.
 Touch the Start/Stop sensor control.
Tip: If starching separately or automati-
cally, thoroughly clean the detergent
dispenser drawer, especially the siphon,
regularly.
Dye removers and dyes

Damage due to color run/dye re-
movers.
Color run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use color run or dye removers
in the washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.
27